2049

2049 - Potentiostat / Galvanostat

2049 Potentiostat GalvanostatOld Price, brand new features

This instrument is well suited for routine purposes and long-term applications such as corrosion measurements under stress or whenever it is required to perform continuous measurements without immobilizing higher-cost instrumentation. The Model 2049 is complete with a 4’/2-digit LCD display for clear and accurate reading of both current and potentials. These signals are also permanently available as low-impedance replicas at the front-panel in order to simplify the connection of external devices. The low-noise characteristics make the Model 2049 well suited for low-current applications, while the extreme simplicity of the commands together with the fully-protected circuitry make this potentiostat the ideal choice for industrial and classroom applications.

Technical Specifications:

  • Output voltage: ±22V
  • Output current: ±1.2A (Continuous)
  • Output current (Peak): ±1.6A (5 sec peak)
  • Controlled potential range: ±5.000V
  • Controlled potential resolution: 1 mV
  • Operating modes: Potentiostat or Galvanostat (floating or grounded)
  • Galvanostat ranges: 7 decades 1µA up to 1A
  • Galvanostat setting resolution: 0.1% of the selected range
  • Reference input leakage current: < 5x10 -11 A @ 25°C
  • Overall response time:
    • (Potentiostat, 1kOhm load); 0.7 µsec
    • (Potentiostat, full load); 1.2 µsec
  • Response time as galvanostat: (100 mA range); 8 µsec
  • Output ripple and noise:
    • (No load) - 100 µV peak-to-peak
    • (Full load) - 250 µV peak-to-peak
  • Potential stability:
    • (VS line voltage) - 100 µV (10% variation)
    • (VS temperature) - 10 µV/°C
    • (VS time) - 100 µV/week
  • Display: 4 1/2 digit LCD, 20mm characters
  • Overload protections:
    • Voltage (reference input) - ±100V D.C. continuous
    • Current - Permanent output short-circuit allowed
  • Interfacing capability: Digital l/O for cell and current ranges.
  • Dimensions & weight: 440xl50x420mm depth, 12kg

Operating principle:

operating schemeThe main amplifier A1 contains the power stages and provides to the output current, voltage swing, gain, short-circuit protection and the summing node for the various inputs and feedback. The electrochemical cell is connected with the COUNTER electrode to the output of A 1and the WORKING electrode to the electrical common with a set of calibrated shunt resistors for precise current measurement. The differential amplifier A 2measures the voltage between the REFERENCE and WORKING and provides the negative feedback signal for potentiostatic mode operation. A 3is a unity-gain buffer amplifier for the current signal and for negative feedback in galvanostatic mode. The reference source is connected to a multi-turn potentiometer for precise setting of the cell potential. All signals (current, reference and standard source) can be monitored with the built-in DVM.

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close