7805

7805 - Electrochemistry Interface

High-speed arbitrary Waveform Generator and Digitaliser

7805It is hard to observe new things without the right tool for exploration. Electrochemical techniques have advanced significantly since the first cyclic voltammetry was performed. Each time a new field was faced by the scientist, the need for more specialized equipment was apparent.

At AMEL, we have always listened carefully to customer requests and translated them into practical solutions. Therefore, it is not surprising that we have introduced this high speed interface for the most demanding of tests, with microsecond capability and multiple features for optimal flexibility.

The 7805 can interface easily with any potentiostat through analog connections, but offers the best performance in conjunction with the AMEL 7000 series, integrating flawlessly with the Junior Assist suite of software.

This unit is so powerful and so easy to manage, with the arbitrary waveform graphical editor, which lets the user visualize what the experiment will be, coupled with an easy digitiser interface to see the results .

Technical Specifications:

Operating Mode
Amel 7805 Arbitrary waveform generation and data acquisition
Analog Bandwidth
Amel 7805 DC – 2.0 MHz
Analog Input
Measuring Config. Waveform out to modulation input of the pstat
I, V inputs from monitor output of the pstat
Voltage Range ± 5 V DC+pkAC gen. Output
± 10 V Vin ± 5 V I in
I / O BNC  Outer contact grounded receptacle
Generator Performance
Sampling Time  500 nS – 500 uS
Max Buffer Length  20 mSec – 20 Sec
Generator Output  50 ohm ± 5 V
Digitaliser Performance
Voltage Range ± 10 V V input
± 5 V input
Input Impedance -capacitative part < 50 pF
Input Impedance - resistive part > 1 Mohm
Sampling Time 200 nS- 200 uS matching the relative generation window
Input Bandwidth > 2 MHz (-3 db)
Measure Performance
AC & DC Accuracy  0.2% ±1 LSB
Meters and Interface
Voltmeters 12 bit I/V input with simultaneous sampling
Generator 14 bit generator
Sampling Rate 200 nSec min on the A/D channels corresponding to 500 nSec on the D/A channels
Digital Interface USB 2.0 and 1.1 compatible
Power Supply and Size
Power Sources From the USB (500 mA), or from external psu (5 V 600 mA max)
Power Consumption 3W max.
Size & Weight 400 x 430 x 90 mm (L x W x H) - Kg 3

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close