595

595 - Polarisation Cell for Corrosion Testing

Particularly suited for testing on metallic fragments on cylinders molten in resin.

596Model 595 fulfills recommendations of A.S.T.M. designation G5-69(964).

The cell consists of a glass container with 6 ground-glass joints. The specimen is mounted on a special sample-holder through the central neck.

Two large anodic compartments, terminated by frited-glass disk, accept platinum counterelectrodes, keeping separated the related reaction or gas development.

A Luggin capillary, coupling the reference electrode, can be set at the shortest distance from specimen, thus minimizing iR drop. Flat bottom allows stirring while electrolyte circulation can be made through inlet-outlet.

Part List of Model 595

Code Description Photo
596/AC Anodic compartment, dia. 24mm 596ac
596/CH Stainless-steel cell holder 596-CH
596/GB Two-ways gas bubbler 596-GB
596/INOU Optional inlet-outlet 596INOU
596/LU Special Luggin capillary 596LU
596/LUC Clamper for Luggin capillary 596-LUC
595/MB Main container, one liter  595MB
595/SH composite sample holder 595SH-300x64
596/SHOR Replacement O-RING
596/TH/100 0°C to + 100°C thermometer
596/EA Spare counter electrode holder

Model 595 Cell is normally quoted with two pieces of each 596/AC, 596/LU, 595/SH and two Model 805/SPG/12 platinum ring electrodes.

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close