7060 - Potentiostat / Galvanostat

Hi-Power performances to explore new fields

7060 master unit and slave

7060 master unit and slave

Electrochemical laboratories have an increasing need forhigh currents instruments: batteries, fuel cells and other energy-related studies are on the leading edge of today’s research.
AMEL has 40-years of experience in high power potentiostatsand has always offered state of the art instruments by strictly following the electronic field advances.

The Model 7060 is a powerful potentiostat available in two versions:

  • ±30 V – ±12A or
  • ±15V – ±25A

with all the features and advanced techniques available
at your fingertip.

Some parts of this new unit are specially addressed at energy-related studies in order tomaximise the usable range of the instrument.
The unique characteristic of the 7060 to drive up to three slave units 7061 up to a huge 30 V 48 A deliverable power makes this potentiostat unsurpassed forpower and flexibility.

The connection with our FRA model 7200 under the Zassist control software, opens, to the advanced research, a window on an unexplored world in high power EIS.
The presence of RS-232 and USB interfaces allow direct connection of the system to the computer; the Junior Assist and Battery Assist software will help you in programming experiments, testing sequences and long run cycling with plenty of flexibility on both driving waveforms and data acquisition.

Find today in the AMEL range the solution of tomorrow’s experiments!

Print Friendly, PDF & Email

Technical Specifications:

7060 Master Unit

Polarisation Capabilites  
Voltage (compliance) ± 30 V or ± 15 V
Voltage (controlled range) ± 10 V
Current ± 10 A continuous (± 12 A peak) or ± 25 A
Voltage Resolution 400 uV
Accuracy ± (0.2% +0.1% F.S.) worst case
Reference Electrodes  
Input Impedance > 1 Tohm
Input Capacitance < 50 pF
Biasing Current < 50 pA @ 25 C°
Common mode Rejection > 50 dB full frequency response
Common mode Voltage Range ± 12 V
Input BNC Outer contact grounded
Electrochemical Techniques  
Polarisation Sweep Ramp, staircase, triangle, square wave
Real Part Managing IR compensation
Limits of IR compensation 0-400 % of the Rs
Frequency Response 
Potentiostatic Bandwidth (max) 20 KHz (-3dB) resistive load (1000 Ohm)
Galvanostatic Bandwidth (max) 6 KHz (-3dB) resistive load (100 Ohm)
Meters and Interface
Voltmeters & Ampere Meters ± 25000 counts 20% overload allowed
Temperature Meter - 200 + 500 C° with PT1000 probes
0.1C° resolution 0.2C° accuracy
Sampling Rate 100 readout / sec (included data transmission)
Digital Interface USB and RS 232 with full instrument control
Power Supply and Size  
Voltage Mains 115 / 230 V ranges (± 10%)
Power Consumption 400 VA max
Size & Weight 420 x 440 x 250 mm (L x W x H) Kg 25
(rackmount brackets excluded)

7061 Slave Unit

Polarisation Capabilities
Voltage (compliance) ± 30 V or ± 15 V
Voltage (controlled range) ± 10 V
Current ± 10 A continuous (± 12 A peak) or + 25 A
Slave Connectable Units Up to 3 for 30 V version
1 for 15 V version
Max System Performance 30 V - 48 A or 15 V - 50 A